Marco Altini wrote a great post recently comparing the usage of the SDNN heart rate variability (HRV) feature to rMSSD, which is the most commonly used feature to compute HRV. The post was instigated by the fact that Apple has chosen to use only SDNN in the Apple Health app to compute HRV, which brings up the question: can we use SDNN instead of rMSSD? Marco takes his usual data-driven approach to get to the answer in this excellent post.
TL:DR – yes we can. However, we recommend you read the whole article if you have any interest in HRV. If you’re looking for a primer on HRV before you dive in, check this out: Heart Rate Variability Review
The full post is reposted below with permission from Marco. The original post can be found here: https://www.hrv4training.com/blog/heart-rate-variability-hrv-features-can-we-use-sdnn-instead-of-rmssd-a-data-driven-perspective-on-short-term-variability-analysis
One really good thing about the sports science community, is that we have settled on what feature to use when we talk about heart rate variability (HRV).
As many of you know, HRV can be computed in many different ways, starting from our basic unit of information, the RR intervals (beat to beat differences in instantaneous heart rate). The sports science community through the work of many, including Martin Buchheit, Daniel Plews, Paul Laursen, Andrew Flatt, Martin Esco, Fabio Nakamura and a few others, in the past 10-15 years, settled on rMSSD as the most meaningful and practical feature to use in applied research and real life, when working with athletes.
Why rMSSD? Well, first of all, most sports scientists are physiologists, they know what they are talking about when considering physiological processes in the human body, and it turns out what also came up from all these studies, is that there is mainly one thing that can be measured using short term HRV features: parasympathetic activity. Without going into another primer on HRV (see this post if you are looking for one), parasympathetic activity represents our body’s rest & recovery system, and can be captured in terms of HRV: a stressor might for example induce a physiological response in terms of reduced parasympathetic activity, which translates into lower HRV as the nervous system modulates heart rhythm in response to such stressor. Parasympathetic activity acts quite fast, in the matter of seconds. How do we capture these fast changes? rMSSD, due to how it is computed (just math), captures fast changes in instantaneous heart rate, hence it reflects very well parasympathetic activity. It’s also easy to compute and standardized, hence we can be certain we all talk about the same thing, which is a good starting point.
Wonderful, we have a feature that everybody agrees on, and has also a clear link to how physiology works. All problems are solved and we can use HRV4Training or our favorite HRV app to gather data, compare results, and learn a bit more about how our body responds to training and life stress.
Well, not so fast.
Apple, the Health app and SDNN
Unfortunately, Apple decided to provide no access to raw PPG data in the Apple Watch and no access to RR intervals either (like a Polar strap would do), as well as not to implement standard communication protocols (e.g. the bluetooth smart heart rate profile). This means we cannot compute rMSSD or any other feature ourselves, as we’d do with another sensor. Additionally, they decided to limit communication between the Watch and any app just via the Health app, and use only one HRV feature in the Health app: SDNN. The reasons are of course unknown and undocumented. There is no access for developers, and no possibility to communicate with anyone involved in this work at Apple. Anyhow, now that we got as far as understanding what is used in Health (SDNN), and we know all the limitations around it, the problem remains, how do we deal with it?
Normally, this would be none of our concern, but as Apple has almost a monopoly on mobile platforms today, what they decide to do, affects all of us that rely on their platform. Right now, we at HRV4Training write the SDNN value to health when you measure. However, the whole point of the Health app, is that we can all happily exchange data. So, if you use an Apple Watch or another device that reliably writes to Health when you take a measurement first thing in the morning (never forget that context is key), shall we read that value and use it to compute your Recovery Points and all our analytics? Can we rely on SDNN or shall we keep ‘forcing’ users to measure via our app and ignore the Health app?
I believe it’s time to have a look at the data, and try to understand from a practical point of view, what are the implications of using SDNN, and what use can we make of this parameter.
In particular, can we determine by looking at years of contextualised physiological measurements taken using HRV4Training if SDNN can be a valid alternative to rMSSD?
Read on to find out.
Having worked in this space for the past six years, obviously I have some assumptions to start from. In particular, anyone that has measured HRV in the morning using one of the available apps, and has gone back and forth between rMSSD and SDNN, as certainly noticed that the day to day variability is extremely similar (see images below). Absolute values here are irrelevant, as what we care about is how physiological stress is changing over time, in relation to your historical values.
We also know that both measures capture variability (by definition) and I would speculate that for ‘real world measurements’, which means mostly 60 second ones, and in the best case 5 minutes ones, variability is indeed the keyword. What do I mean by that? I mean that any way to capture variability, would provide useful feedback. What we are interested in, is how stress modulates heart rhythm, higher stress reduces variability, no matter how you capture that variability (in my opinion!). Think it this way: in the past, we used just heart rate for this same purpose, as huge stressors would increase heart rate. However we have shown (and we’ll show also later in this post) that heart rate changes are typically very small (less than 1%), while changes in HRV are greater and therefore more useful to better understand the impact of training and life stressors.
How can we use data to evaluate rMSSD and SDNN?
Power to the data
In order to understand if we can use SDNN as a valid alternative to rMSSD, we will perform three different analysis:
- Population level: distribution of the data and correlation
- Individual level: baseline and coefficient of variation over months
- Effect of acute stressors on HRV: training intensity and getting sick
First, we can look at what is the relation at the population level, between individuals. If the two metrics are similar, we expect a similar distribution of values (similarly shaped, again the absolute values do not matter here), as well as a very high correlation between the two.
Secondly, we should also look at how things change within individuals, as that’s really what we care about. Can we see similar trends over time? What about other features, not only our HRV baseline, but for example the HRV Coefficient of Variation, typically used in sports science to better understand adaptation to a specific training block?
If we pass these two first checks, then there is one more we can do which is really interesting. In particular, by analyzing longitudinal data for many individuals, and their daily tags (annotations), we can see how good these features are in the context of capturing acute stressors, always a good check to do. For example, we can look at the change in HRV when someone reports being sick, as well as the change in HRV on a day to day basis after a rest day or a hard workout. In this case we expect a consistent reduction in HRV, as we have shown in this paper in the past.
Population level analysis
For this analysis, we look at the average HRV (rMSSD and SDNN) for 15 000 individuals as captured in 2016 and 2017 using the HRV4Training app. That’s about a thousand times more people than the average sports science study.
Distribution of the data
Both distributions look highly skewed, with a long tail, as expected. This is one of the reasons why we typically use / report the logarithm of rMSSD, a transformation that makes the data more normally distributed, and should probably be done also when looking at SDNN.
From SDNN to Recovery Points
In the next analysis, I am using Recovery Points, the metric we derive from rMSSD in HRV4Training, which is nothing more than a logarithmic transformation.
I wanted to show exactly what the data would look like in HRV4Training if we were to read SDNN from Health, hence I proceeded as follows: first, I’ve created a model to estimate rMSSD from SDNN, based on data from 15 000 individuals. Then, once I could estimate rMSSD fairly accurately (given the high correlation show above, this is an easy task), I have applied the usual formula to go from estimated rMSSD to estimated Recovery Points (shown with an * in the plots below). We can see how the distributions are really similar, this time also in terms of absolute values, and more ‘normal’ than what we had before:
Within individual analysis
Coefficient of Variation
Effect of acute stressors on HRV: training and getting sick
There is one more analysis we can perform which is really interesting. In particular, by analyzing longitudinal data for many individuals, and their daily tags (annotations), we can see how good these features are in the context of capturing acute stressors, always a good check to do.
For example, we can look at the change in HRV when someone reports being sick, as well as the change in HRV on a day to day basis after a rest day or a hard workout. In this case we expect a consistent reduction in HRV, as we have shown in this paper in the past.
The following plots are also generated from data collected in 2016 and 2017 from about 15000 individuals.
Training intensity: by gender
Training intensity: by age group
Training intensity: more categories
Summary and practical implications
In this post, I analyzed the relation between the two most commonly used HRV features: rMSSD and SDNN. I’ve shown how for short measurements taken under known conditions (reproducible context, the most important thing when analyzing physiological data: first thing in the morning), what really matters is variability, and both measures can capture such variability.
I’ve shown also that the two metrics are similarly distributed, highly correlated, and that Recovery Points, our human-friendly HRV metric, can be estimated from both. SDNN can therefore be used to track physiological stress over time, as it is capturing differences in cardiac variability both at the population level (as known from years of research) as well as within individuals, for example with respect to external stressors (training, getting sick). While the physiological underpinnings of using rMSSD as HRV marker have stronger links to how the autonomic nervous system works, the fact remains that in practice, higher stress reduces cardiac variability no matter how you measure it, and these changes can be captured with short 60 seconds tests using an app.
Note that the differences in response to acute stressors for rMSSD were still slightly higher, hence rMSSD would remain my preferred feature when available.
To me, the main challenge for today’s practitioners is not using one feature or the other, but proper testing. What I mean is that educating your clients on the importance of context and the morning routine is by far more important than using one feature or the other. Unfortunately, devices that claim to do HRV all day, often simply reporting random data points (e.g. the Apple Watch), are really making it harder to properly communicate these aspects.
Hopefully this post provides some clarity to the many that are a bit confused by the different metrics, and also can get us started on some common ground between people ‘loyal’ to one metric or the other: it’s mainly about variability.
What’s next for HRV4Training?
We are working on an updated version of HRV4Training, which will compute Recovery Points based on SDNN data present in Health, should you prefer to do so instead of taking your measurement with our app. We are doing so only now because there is finally evidence that the Apple Watch can measure SDNN as good as a Polar chest strap, when a measurement is triggered using the Breathe app. You can find the validation by Hernando et al. “Validation of the Apple Watch for Heart Rate Variability Measurements during Relax and Mental Stress in Healthy Subjects”, which was just published, here.
Please remember that measurements must still be collected first thing in the morning, because there is nothing to learn from data points that are collected at random times of the day or night (which is what the Apple Watch does automatically if you do not use the Breathe app to trigger a measurement). Context is key, and we’ll keep repeating it until exhaustion.
In practical terms, you will simply have to use the Breathe app first thing in the morning, from your watch, so that an HRV measurement is forced and pushed to Health. Then you will be able to open HRV4Training and read from Health instead of measuring, fill in your tags as usual, and let the app compute significant changes, and provide you with advice.